-40%
TARAMPS TW MASTER & TW SLAVE WIRELESS TRANSMITTER USA DEALER SAME DAY SHIPPING
$ 81.84
- Description
- Size Guide
Description
TW Master & TW Slave TarampsThe TW SLAVE by Taramps is a wireless audio receiver with two output channels. Each MASTER audio transmitter can establish an audio link (wireless connection) with up to 4 SLAVES receivers. This connection is completely digital, the audio is sampled at 48KHz with a 24-bit resolution, ensuring excellent sound quality, in addition to eliminating the need for RCA and remote cables between the CD / DVD Player and the amplifier (s). Another Taramps accessory to make your car sound system complete and practical.
The TW MASTER by Taramps is a wireless audio transmitter with two inputs channels. Each MASTER audio transmitter can establish an audio link (wireless connection) with up to 4 SLAVES receivers. This connection is completely digital, the audio is sampled at 48KHz with a 24-bit resolution, ensuring excellent sound quality, in addition to eliminating the need for RCA and remote cables between the CD / DVD Player and the amplifier (s). Another Taramps accessory to make your car sound system complete and practical.
Technical Information:
TW SLAVE
RADIO FREQUENCY OPERATING RANGE
ISM band 2.4 GHz (2.404 GHz to 2.476 GHz)
RF POWER
+20.2dBm (105mW) Short Range Device
OUTPUT IMPEDANCE
470 ohms
MAXIMUM OUTPUT LEVEL
L/R: 2V RMS (+8dBu)
FREQUENCY RESPONSE
10Hz ~ 22KHz (-1dB)
TOTAL HARMONIC DISTORTION
0.01% ~ 1KHz
SIGNAL TO NOISE RATIO
>90dB
CROSSTALK (SEPARATION BETWEEN CHANNELS)
>80dB
POWER SUPPLY VOLTAGE
10 ~ 16 VDC
MAXIMUM CONSUMPTION
100mA @12.6 VDC
STAND-BY CONSUMPTION
40mA
PROTECTION SYSTEM
Internal resettable thermal fuse (PPTC) + protection against polarity inversion
MAXIMUM REMOTE OUTPUT CURRENT
250mA
DIMENSIONS (WXHXD)
3.46" x 1.18" x 4.65" (88 x 30 x 118mm)
WEIGHT
0.22lb (0,1kg)
EAN
7898556841207
TW MASTER
RADIO FREQUENCY OPERATING RANGE
ISM band 2.4 GHz (2.404 GHz to 2.476 GHz)
RF POWER
+20.2dBm (105mW) Short Range Device
CONNECTIVITY
Up to 4 receivers (SLAVE)
INPUT IMPEDANCE
10K ohms (RCA)
1K ohms (HIGH LEVEL)
MAXIMUM INPUT LEVEL
L/R (RCA): 2V RMS (+8dBu)
FREQUENCY RESPONSE
10Hz ~ 22KHz (-1dB)
TOTAL HARMONIC DISTORTION
0.01% ~ 1KHz
SIGNAL TO NOISE RATIO
>90dB
CROSSTALK (SEPARATION BETWEEN CHANNELS)
>80dB
POWER SUPPLY VOLTAGE
10 ~ 16 VDC
MAXIMUM CONSUMPTION
160mA @12.6 VDC
STAND-BY CONSUMPTION
10mA
PROTECTION SYSTEM
Internal resettable thermal fuse (PPTC) + protection against polarity inversion
DIMENSIONS (WXHXD)
3.46" x 1.18" x 4.65" (88 x 30 x 118mm)
WEIGHT
0.22lb (0,1kg)
EAN
7898556841191
Warranty:
Taramps products come with a 1 year limited warranty from the manufacturer. This warranty does not cover: Burnt voice coils, abuse and damaged caused by improper use or installation, physical damage to the product cause by the consumer, installation charges incurred, damage to amplifiers when connected at less ohm load than specified by the manufacturer, damage to amplifiers caused by insufficient electrical requirements, water damage, excessive wear and tear, and any other cause implied in the warranty card supplied by the manufacturer.
Shipping:
We offer free Same-day shipping to the USA. For international shipping, please ask for availability.
Return Policy:
You may return most new, unopened items within 30 days of delivery for a full refund, less any shipping costs and re-stocking fees.
All items returned that are not defective, in NEW condition, and unopened will be applied a 15% re-stocking fee; this fee covers shipping expenses when sent and handling
We shall issue the refund upon return (once the item has arrived at our warehouse). All returns will be inspected upon arrival and applied a re-stocking fee of between 15% to 50% dependent on the condition of the item returned
The customer must ensure that the item is adequately wrapped, secured and that it includes all components (including free items) when returning the item
No components should be missing, including screws, manuals, cables, protective films, plastic coverings, etc. The item returned must be in NEW condition. The factory seal cannot be open in any case
FAILURE TO MEET ANY OF THESE REQUIREMENTS WILL RESULT IN A HIGHER RE-STOCKING FEE OR DENIAL OF RETURN REQUEST