FTDI USB to Serial Adapter TTL Cable 5V 6 Pin UART Female Header Converter FT232

Description

DTECH
FTDI USB to Serial Adapter TTL Cable 5V 6 Pin UART Female Header Converter FT232
UART IC FT232RL Chip for Windows 10 8 7 Linux MAC OS (6ft, Black)
for 5V logic level serial communication
USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a laptop via USB port
A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
6 feet FTDI USB to serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND
FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
It is built with FTDI FT232 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port and D2XX ‘direct’ drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.
NOTE:
If any installation or usage issues, please email us or you may download a driver and usage guide on FTDI official website
The original FTDI chip is embedded in the USB-A end; 6 way 0.1” header connector with VCC (5V power) and GND (ground), as well as RXD, TXD, RTS and CTS at 5 V logic level.
Applications:
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O, FPGA / PLD to USB
Replace MAX232 type level shifters allowing for direct connection of products to PC
Industrial Control / USB Software / Hardware Encryption Dongles
Features
- The I/O pins of the FTDI wire are configured to operate at 5.0V logic level - Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking;
- Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible
Specific
Interfaces: USB 2.0 type A Male Port ; 6 pin Female Socket Header
Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater
What’s Included
1 x USB to Serial TTL Level Converter Cable
1 X User Manual
Payment
We accept PayPal only. (Accept credit or debit card and bank payments safely and easily with PayPal.)
Please understand that for variation listings, there is a drop down menu for you choosing the desired items. We are unable to change any content of your order based on the eBay checkout note or PayPal message.
Please verify your address during checkout . You may not be able to change the shipping address once the payment is completed due to the shipping status.
If you are paying through PayPal using e-Check, please note that your item can be shipped only after e-Check has cleared.
Shipping
Please select the correct shipping address when paying for the item. If you want to change your shipping address after checkout, please contact us and we'll try to update your order. However, depending on the shipping status, please understand that we are unable to guarantee the shipping address can be updated after checkout.
Unfortunately, we do not offer local pick up.
International Orders:You are responsible for any applicable import duties and local taxes. Please verify with your customs before making your purchase.
Contact Us
If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our Priority!
If you have any concerns about your order, please contact us through eBay message or e-mail to resolve any issues before leaving a negative feedback or opening a dispute. We will reply within 1 business days (public holidays not included).
If you don't get a response within 1-2 business days, please check your SPAM box in case your email provider has filtered out our emails. Please add us in your contact and email us again.
Powered by SoldEazy