ATLAS 70 000 046 UNIVERSAL SIGNAL CONTROL BOARD - All scales -

Description

EVERYONE now gets .00 coupon and a
discount
code toward a future qualifying order!
(details in shipment)
Mountain Subdivision Hobbies
modelrrsupply
ATLAS - Signal Control Board
From Atlas:
There is no single model railroad accessory that captures the essence of prototypical railroading more than an operating signal system. Whether standalone or as part of an integrated system, a working signal adds both visual and operational interest to your railroad.
The Atlas All Scales Signal System enables you to provide realistic information to your train crews in a simple, yet expandable way. Our growing line of signal heads, masts, and bridges spans most common modeling eras, and are easy to install on your layout. The signals feature true scale dimensions and details, and are available in single and double head arrangements, as well as several multi-track bridge configurations. Regardless of scale, all Atlas signals now utilize a small standardized connector and separate cable to connect to the signal control boards, minimizing the impact of installation on a layout with existing scenery.
The Signal Control Board can operate standalone, or as part of an integrated system to replicate the behavior of many North American prototypes, providing selectable 2 or 3 block (ABS) operation, flashing aspects, approach-only, and PRR and color position light options. It can drive either common cathode or common anode signals, and can be powered by AC or DC. The system can be used on layouts operating on either analog (DC or AC) or Digital Command Control (DCC) power through the use of appropriate block detectors (not available from Atlas), and can also be manually controlled.
OPERATING OPTIONS
Stand Alone Operation
: in this case a single signal runs independently of other signals, and displays appropriate aspects, such as red – yellow – green, in a timed manner. The signal turns red when a train enters a “block”.
Integrated ABS Block Signaling
: Connecting a number of Signal Control Boards together in a daisy-chain fashion enables you to represent a prototypical block signal system, where the occupancy of the blocks ahead and behind your train determines the aspects displayed by the signals. The number of blocks is controlled by a simple jumper setting on each signal control board. A block detection system (either DC or DCC) is required.
Approach-Only Signaling:
To better support prototypes whose signals do not illuminate until a train is nearby, the Signal Control Board has a setting to enable this behavior when connected in an integrated system.
Flashing Aspects:
On some railroads, in order to increase the number of indications available to train crews, such as intermediate restrictions, certain flashing aspects are used. These aspects are now supported with flashing yellow and green options, and are automatically enabled for certain prototypes by a single jumper setting.
Complex Signaling and Interlockings
: In combination with our new Turnout Control Module, simple turnout indication or complex route-based signaling is possible. COMING SOON!
Manual Control
: Full control of signal aspect for Red, Yellow, Flashing Yellow, Flashing Green (with appropriate auto return to Green) is available for those wishing to create the ultimate in CTC-like systems.
THREE-STEP QUICK START SETUP
1. Plug any Atlas signal into the universal attachment cable (70 000 050) and then into the Signal Control Board.
2. Connect a single wire from your block detector of choice (DC, DCC, Optical) to the Signal Control Board.
(See our eBay store for the NCE #205 BD-20)
3. Connect power from your transformer to the Signal Control Board.
FEATURES
Signal Control Board is universal, whether you model in N, HO, or O, AC or DC!
Common cathode AND common anode signals supported
Backwards compatible with original Atlas signal products
Accepts DC, DCC and Optical detector input for block detection (detectors not included)
Expanding line of signal heads and configurations available to fit many eras and prototypes
True Prototypical operation (ABS) for 2 and 3 block systems
Flashing Yellow or Lunar White modes are selectable, and Flashing Green aspects are supported
Easy to extend the system as your railroad grows by using simple telephone-style cord connections
Modular design with standardized plug connections between signal heads and boards
FAQ
Q: What do you need to get started?
A: The  total  number of boards and signal heads depends of the size and complexity of your layout.   For each signal target,  a control board is required along with a connecting cable between the signal and the board. The simplest way to achieve this is to use the Starter Sets which contain each of these pieces, as well as a quickstart manual. You will also need some way to trigger the signal, which could be a block detector circuit for prototypical operation.
Q: What is a block detector?
(See our eBay store for the NCE #205 BD-20)
A: A block detector is a device that senses when a train is in a specified area of your layout. The type of detector you chose depends on whether you run your layout in DC or DCC, or want to use optical sensing. Current or voltage detectors require an electrically isolated section of track to determine a block, while optical detectors can be placed anywhere they can "see" the train passing. There are a number of detectors available from different manufacturers.
Q: How does simple stand alone operation work?
A: When a train is detected, the signal  head changes to red. After the train passes completely through the detector, the signal will change to yellow for 8 seconds, then go back to green. You can also use a simple switch circuit (see Atlas website) to trigger the signal manually.
Q: How does integrated operation work?
A: To enable integrated ABS signaling between two or more signals, all you need to do is to connect the signal control boards with modular Atlas SCB Interconnect cables as shown in the manual or online documentation - the boards take care of the rest!  The timed yellow that is used in stand alone mode is disabled,  and all aspects are now under the full control of the blocks and signals both in front and behind your train.
Q: Can I manual set the aspect of the signal, such as a CTC system?
A: Yes!  Each aspect of a signal can be manually set, including enabling a flashing green option. See the online documentation at atlas website for full details.
Q: I  have you old O scale signals which have a few differently sized connectors on them. Can I  use these with the new Signal Control Boards?
A: Yes! Atlas has a compatibility connector kit (70 000 056), available seperately,  to atttach these to the new signal board without changing the existing connectors.
Q: Can I use other manufacturer's signal heads with your system?
A: Yes! The  4-pin harness DIY kit (70 000 051) enables you to add the common interface plug to your desired signal.  For more information on this, please see Atlas website
Q: Why would the red pilot LED is lit but the signal will not illuminate?
A:If the red pilot LED illuminates when power is applied to the board and you have double checked your signal connections to the board but the signal still will not illuminate try changing the position of JP2. JP 2 changes the board to common anode or common cathode ( common + or common - ) and if it is in the wrong position you will not burn out the signal it just will not illuminate. Also check the position of JP1, JP3 and JP4. There defaults are pins 1 and 2 for JP1, pins 2 and 3 for JP3 and pins 1 and 2 for JP4.
__________________________________________________________________
Questions, Special orders, Inventory requests:
Please contact us using eBay's message system.
Your shipping address
:
IMPORTANT!!
Please confirm your shipping address is correct
before
making payment.
You know where you live, we don't!
eBay does not allow us to change an address after payment is made.
If you ask us to change address, it will require us to cancel your order, ask you to correct your address and redo order.
Combined Shipping: International
Due to eBay's new policies, they require us to require immediate payment on your purchase.
PLEASE use the eBay shopping cart - it may save you money!
In the event eBay overcharges you for shipping, we will send a refund for the correction.
Combined Shipping Discounts: USA
Due to eBay's new policies, they require us to require immediate payment on your purchase.
PLEASE use the eBay shopping cart - it may save you money!
If we issue a credit for overpayment of shipping, we may deduct a portion of the overpayment to cover eBay fees.
eBay DOES NOT refund the fees we pay based on shipping charges if we issue a refund for shipping!
Paid orders may be combined or ship as seperate orders with no shipping refund.
USA Shipping:
We ship using USPS First Class, Parcel Post, Priority Mail, and occasionally FedEX.
We may
upgrade
your shipping method at our discretion.
Tracking is provided. Orders over 0 will require a signature per Paypal rules.
International Shipping, Customs Fees, Import Taxes and Duty:
We ship USPS First Class International and Priority Mail. It's your choice!
There is limited or no tracking on FCI or Flat Rate Priority Shipping.
Allow two to ten weeks when choosing First Class International, but it's usually far less.
Please Note:  Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Don't ask us to falsify a customs form...We will not do it.
Insurance:
We insure all International shipments and some domestic shipments.
Our insurance carrier requires a 20 day domestic (USA) and 40 day International waiting period before we file a claim.
You agree to wait the required time and agree to complete a online affidavit for the insurance company if we file a claim for your lost or damaged shipment. Shipsaver is our carrier and they provide excellent
service.
Handling and Shipping time:
WE SHIP FAST!
All orders ship same or the next day. In the event of an issue, we will message you via eBay message system.
Read our feedback page to see what our customers say about us.
Please be aware USA Shipping Holidays may affect International Shipments.
Sales Tax:
New York Residents will be charged Sales Tax - It's the law.
Returns:
No returns are accepted on opened items.
All items we sell are covered by Manufacturer Warranty.
D
o not open a return case for defective items, Contact us FIRST, we'll work it out.
A restocking charge of 15-20% may apply.
We do not refund original shipping charges.
Please review the return policy on the shipping tab.
Warranty?    New or Used?:
Everything we sell is brand new and covered by Manufacturer's Warranty unless noted.
We will assist you in the warranty process if needed.
We only sell brand new items -
Our items are all factory fresh!
Thanks for choosing Mountain Subdivision Hobbies
Supplying modelers with items from premium model railroad & DCC manufacturers since 2002